Functional Rubiks Cube. No supports!

prusaprinters

This model is a fully functional cube that does not require support material to print.The files are in the recommended printing orientation to avoid supports.You can print all the parts in PLA, but it is recommended to print the clip in a stronger material like PETG when possible.Recommended print settings:Wall thickness: 1.2mmSolid layers (top and bottom): 3Infill: 10%Supports: OffPartQuantityMaterialInfillSupportsCORE 1PLA10%Offmid_face 6PLA10%Offside_face 12PLA10%Offcorner_face 8PLA10%Offclip 6PETG0%Off  Assembly instructionsStep 1:Insert the clip piece into the mid_face piece.Repeat for all 6 mid_face pieces.  Step 2:Press the CORE piece into one of the assemblies made in Step 1.   Step 3:Place 4 side_face pieces over the assembly (see figure).   Step 4:Place 4 corner_face pieces over the assembly (see figure).   Step 5:Press 4 mid_face assemblies made in Step 1 into the core piece (see figure).   Step 6:Place 4 side_face pieces over the assembly (see figure).   Step 7:Place 4 corner_face pieces over the assembly (see figure).   Step 8:Place 4 side_face pieces over the assembly (see figure).   Step 9:Press a final mid_face assembly into the remaining hole on the CORE piece.The Cube is now assembled.