Fully Printed 1:28 RC Car Chassis (MINI-Z compatible)

thingiverse

## For the most up-to-date parts, visit the GitHub project page. ### Video: https://www.youtube.com/watch?v=_t0HLC2bZMU ### This is a 1/28 scale RC chassis designed to be compatible with Kyosho MINI-Z body shells. Current version fits 90mm (M) wheelbase shells. ### Update 8/26/20: I've released a 4WD chassis, available here. The 4WD version is optimized for drifting, while this one is better for grip racing and is cheaper to build. ## Features: - Independent front suspension and hinged rear suspension - Ackermann steering geometry with 45 degree max steering angle - Uses common and cheap parts (625 bearings, M3 hardware) - Low part count and variety - only 3 different screw lengths needed; locknuts everywhere ## Parts List | Part | Quantity | Notes | |-----|-----------|--------| | M3x20mm button head screw | 7 | | | M3x14mm button head screw | 2 | | | M3x10mm button head screw | 8 | | | M3 lock nut | 17 | | | 625 bearing | 4 | | | 130 size brushed motor, 2s compatible | 1 | | | SG90 micro servo | 1 | | | Compression spring, ~4mm OD, ~6mm length | 2 | For front suspension. Softer springs are better. Retractable pen springs cut to ~6mm can work, but are a bit stiff. | | Compression spring, ~4mm OD, ~20mm length | 2 | For rear suspension. Uncut retractable pen springs work for this. | | Venom Fly 300mah 2s battery (JST connector) | 1 | Batteries up to 45x23x16mm should fit | | Small brushed ESC, 2S compatible | 1 | | | Small radio receiver | 1 | 2 channels or more, smaller than approx 34x22x13mm. Flysky GR3E works if decased. |