Fully parametric utensil drainer divider

prusaprinters

<p>I loved the idea of a divider for Ikea Ordning published here: <a href="https://www.printables.com/model/10226-divider-for-ikea-ordning-utensils-holder.">https://www.printables.com/model/10226-divider-for-ikea-ordning-utensils-holder.</a> But then one day I needed a thing like that for a non-Ikea drainer… So I've designed one myself in Fusion 360 and made it fully parametric.</p><p><strong>Please note that attached STLs will not fit the Ikea Ordning! But you can use the source file to fit this model to any drainer you have!</strong></p><h4>Parameters in the source file:</h4><ul><li>height - the total height of the <strong>drainer</strong> (in mm)</li><li>radius - the radius of the drainer (in mm)</li><li>partsNo - the numer of divisions</li><li>edge - the width of the edge that will cover the drainer's edge (in mm)</li><li>core - the diameter of the core of the divider (in mm)</li><li>hole_diameter - the diameter of holes in the divider (in mm)</li><li>holes_margin_bottom - the amount of space left between holes and the bottom of the drainer (in mm)</li><li>holes_margin_side - the amount of space left between the side of the divider and the holes (in mm)</li><li>base_thickness - the base unit for thickness of the whole part. Walls will be 2 times base_thickness by default, it will also control some other places in the model</li><li>pin_h / pin_d - the size of the pin at the bottom of the divider (to fit a hole in the bottom of the drainer)</li></ul>