Fully Parameterized Drawer Divider Brackets

prusaprinters

<p>These are Brackets to fix a divider board in a drawer. The f3d file is fully parameterized for easy customization. All files print without support if you orient them accordingly.</p><p>By adjusting the parameters of the model to fit your drawer and preferences, you can modify the brackets to fit almost any reasonable type of drawer. The dimensions of the board you want to fit, the preferred measurements of the brackets and screw-holes should be adjusted. After configuring the drawer dimensions and part thickness you can also retrieve measurements for the divider boards from the file. Just inspect the part and measure its length.</p><p>You can choose which brackets to print. If mounting the bracket over the back board of the drawer is not an option, you can either use the front bracket (which goes over the divider board but not over the drawer board) or the bottom bracket (which goes over neither board). You can also choose whether you want bottom plates for the bottom brackets or not. In short: just configure and print the files that suit your needs.</p><p>I currently do not own a 3d printer and therefore can not present any printed objects or experiences with this print. Nevertheless, I would suggest printing in PLA with an infill value based on the thickness you choose. For the default 3mm thickness, 100% infill could be usefull for structural integrity. Printing in TPU might be worth a shot if you plan on moving the divider board a lot; you could attach the brackets to the board with screws and just press fit them on the drawer.</p><p>This is my first design. I am more than happy to receive feedback and criticism.</p>