Fully integrated Printhead with Bowden Splitter / Fan and light for prusa I3

thingiverse

hey folks, Update: so the fan duct is ready, it fits perfectly on a 50mm radial fan designed for that https://de.aliexpress.com/store/product/5-pcs-lot-50mmx50mmx15mm-5cm-5015-50mm-Radial-Turbo-Blower-Fan-12V-For-Computer-CPU/513161_32554832116.html?detailNewVersion=&categoryId=708041 how i told you, here's the single hotend mount for my x carrier (http://www.thingiverse.com/thing:1862515) i added a little cable management to make part changes easy i installed a mount for an XT60 plug, solder it to your heater and push it through, then turn it and you're ready ;) https://hobbyking.com/en_us/male-xt60-connectors-5pcs-bag-genuine.html https://hobbyking.com/en_us/female-xt60-connectors-5pcs-bag-genuine.html i made it expandable, so the first thing that expands is the Bowden Multiplexer (hellyeah^^) it's designed for 1.75mm filament and 4mm x 2mm ptfe bowden tubing other things like probe mount follow the hotend mount screws are M4 (ISO 4762) the multiplexer screws are M3 (also ISO 4762) i used original E3D Pushfits for the multiplexer http://e3d-online.com/Threaded-Bowden-Coupling-1.75mm-Filament?search=bowden or also https://youprintin3d.de/hotendszubehoer/e3d/zubehoerersatzteile/345/threaded-bowden-coupling-1.75mm-filament.html or even this ;) https://reprapworld.com/products/e3d/spares_and_extras/1_75mm/e3d_v6_threaded_bowden_coupling_1_75mm/ so the thing is still working! be patient, tell me any errors or suggestions (nice comments are also accepted ;) Print Settings: Printer: custom I3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% honeycomb