Fully customizable dog ID tag using prusaslicer 2.6 (Easy print)

prusaprinters

A tog tag customizable in PrusaSlicer 2.6!   Print settings:Infill: You might as well do 100% infill for the added strength as it doesn't take much longerLayer height: I printed at .2 but you could go smaller or biggerSkirt/brim: Not needed Support: Not needed if printed flat but you might need some depending on your orientationMaterial: I would recommend a heat and UV resistant material such as ASA or you could use PETG but it might ware faster. I printed in Overture PLA red because I didn't hav e nay ASA handy.Ironing: You could use the ironing feature for a really nice surface finish but it will take longer Instructions to add text:Right click on the model: Click ‘Add part’: Click ‘Text’: This window should pop up: Type in your desired text: Choose your font: Choose the size (you might have to play around with this to get it right): Click ‘subtracted’ if you want it cut out or keep it selected on ‘added’ if you want it to pop out: Then change the ‘depth’, this is how deep or tall the text is. In the photos, I used subtract with a depth between 1 and 2: Then you can move the text by holding the text and you can rotate it by using the arrow a bit like this, <>, at the top. If you ever accidently click out of text, just double click the text preview. Happy printing!