Fully Customisable replacement watch strap keeper

prusaprinters

<p>*<strong>Disclaimer: All watches are different.Be sure to check your watches dimension</strong>*</p> <p>This is a replacement watch strap keeper for your cheap watches. All my (unexpensive) watches have broken this way so I made a universal solution. You need to print in a<strong>FLEXIBLE</strong> filament of any sort, but it does not need to be super flexible like ninja flex, it just needs to be able to stretch abit.</p> <p>The measurements need to be measured according to the size of your watch and the tolerance of your printer, so you probably need a vernier caliper unless you want to approximate it.<strong>Ensure that the wall thickness is higher than the original strap as depending on what material the layer adhesion will be different.</strong></p> <p>If you decide to print with text, print the text side facedown. Depending on your printer and build surface, you might want to use a raft and/or supports. Otherwise, this should not be too demanding on your printer(flexible filament aside).</p> <p>Leave suggestions in the comments, I will improve it when I am free.</p> <p>Edit: thanks to user WrinklyWink for informing me of the proper name.</p> <h3>Tested Settings for semiflexible materials[not ninjaflex]</h3> <p>Using the following options:</p> <p>TS = 7</p> <p>lt = 1.7</p> <p>w = 10.5</p> <p>b = 9.7</p> <p>l = 26.2</p> <p>bt = 1.45</p> <p>Highly recommended as its lasts much longer than default settings.</p> Category: Replacement Parts