Full Size Cosplay Scythe

thingiverse

Hey all, Exodias_Left_Nut here,Thanks for downloading my first ever creation from scratch! Obviously its not too intricate, but i think it's neat nonetheless.Some notes about how i printed this:Handle: Comes in a 32mm diamater, 170mm long flavor. Printed with 10% infill @100mm/s, 200 Deg. on stock Ender 3. Seems to be nice and sturdy. Print as many as required and gue together, or source your own handle. Would recommend making something for the butt of the handle to rest on the ground, im working on my own and will upload it once i come up with something im satisfied withHandle Transistion: Nothing Special, 10% infill @ 100mm/s, 200 Deg. Head: I personally decided to print the head pieces with 10 top and bottom layers, and make the rest of it 0% infill, completely hollow (i was going to make it a pretty thinkinfill but since this is just a prototype so far, i didnt want to waste any filament.) The head pieces were printed at 150mm/s @ 200 Deg. A few final notes:I noticed that turning my flow up to 120 or so on my printer itself and adjusting the print speed in Cura to 150mm/s worked out best for me and everything came out okay so far. MAKE A RAFT FOR THE HANDLE. I cannot stress that enough. The other pieces are fine with just a skirt or nothing at all if your feeling lucky, but if you want to print the entire 170mm of the handle without problems, i highly suggest a raft be used.If any of the parts are cut wrong or not a good fit for your printer, or you have a better idea in general, let me know and i would be glad to make the fixes!Thanks everyone!-K