Full mounting kit table P802Q Steel Zonestar

thingiverse

Hello, This time and always with the aim of improving my printer Zonestar P802Q steel I offer this complete set of fasteners, which consists of 10 pieces. 2 Brackets for the rear to secure the machine to the floor and maintain the same height on both sides on the bars of the Y axis are included in this kit. These brackets play a crucial role in stabilizing the machine and ensuring that it performs at its best. 2 supports for the front, which also allow for the same height on both sides in the Y direction while securing the machine to the ground, are part of this set. This feature enables you to create precise prints with minimal distortion. 2 Squares two adjustable parts which enable the two flanged-axis motor Z to be secured to the ground, thereby strengthening the overall stability and control of the machine, are also included in this kit. You will need additional components, including: * 14 M3 x 12 screws * 6 M3 nuts * 4 M4 x 10 screws It is essential to trim before mounting holes for the Z bar to avoid forcing them into place. I highly recommend taking the time to do this, as it will make a significant difference in the performance of your printer. After testing this kit, I can confidently say that my printer is now more stable and produces higher quality prints. The vibrations of the board are also minimized, making it easier to work with. If you experience any issues with vibrations, you have the option to place foam under the board without adjusting your machine every time. This feature makes it easy to move your machine around without compromising its performance. Print Settings: Printer: Zonestar P802QS Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: Replace your pieces well before slicing, as they are messy and have radii on many edges.