Full length door handles - knobs at the top with embedded magnets
prusaprinters
<p>I didn't want the closing mechanism to be at the bottom, because the door stop would need to be at the bottom as well, which can be an obstacle. That's why I put it all to the top. Also the smaller hinges/handles seemed a bit week, which is why I created these long ones.</p><p>To place the magnets, put a pause at layer 42 (8.4 mm) in your slicer. The provided gcode already has the pause. You will need 20x6x1,5 mm magnets. I bought theses from amazon:</p><p><a href="https://www.amazon.de/gp/product/B00382J9UO/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1&language=en_GB">https://www.amazon.de/gp/product/B00382J9UO/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1&language=en_GB</a></p><p>They have to be this size, others will not fit. The space that is left for the magnet is about 0.1 mm bigger, so just enough to have a tight fit and avoid pulling the magnet out with the nozzle. (never happened to me, but I think this can happen). Be sure to clean your nozzle during the pause, or there will be debris when you continue the print. </p><p>The gcodes have a 4 mm brim added, which I highly recommend. The parts will warp otherwise if the temperature is not stable enough in your environment.</p>
With this file you will be able to print Full length door handles - knobs at the top with embedded magnets with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Full length door handles - knobs at the top with embedded magnets.