Full Graphics Smart Controller Case

thingiverse

Here is the rewritten text: Another great case for the Full Graphics Smart Controller with brackets that attach easily to a V-slot or T-slot linear rail. You'll need 4 M3x25mm screws to connect the two halves housing the LCD, 2 M3x10mm screws to secure the housing to the brackets and 2 M5x10mm screws to attach the brackets to the rail. Also included is a small knob for the encoder. Print Settings: Printer: D-Bot Core XY Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Printed at 0.2mm layer height, 60 deg C heated bed and 215 deg C hotend temperature, 60 mm/s print speed. Post-Printing: I used blue masking tape with glue to secure this part during printing, and it's recommended to remove the part from the tape as soon as possible. I learned my lesson after one copy stuck to the tape! To assemble the case, simply screw in the four M3X25mm screws without using nuts, as the plastic acts as a nut. Just be sure not to overtighten the screws.