FTX Tracer Brushless Battery Tray

thingiverse

UPDATE 28/02/2023 After some skatepark bashing i found the strap area had started to split near the screw holes. Have made some adjustments to counter the issue by tightening the slot for the strap and moving the plated area further back. This will prevent any stress around the screw holes causing splitting. FTX Tracer battery tray upgrade for the BRUSHLESS version of the Tracer. Fits Batterys upto 80mm X 36mm. Requires 4x M3*8 countersunk screws. Uses the original battery strap allowing big or small batterys to be used without any adjustment or messing. Clamps securely around the chasis brace no modifications are required. Print the clamp as is no supports needed i did mine .2 layer height 10% infill with good results. Print the tray with supports turned ON. There are 2 versions on the tray available. 1 has square edges and short walls. other has rounded edges and 10mm high walls. Have any ideas to improve the design then let me know :) This design was created for non comercial use and use by FTX TRACER RC facebook page users and is not for selling. Please do not sell on ebay,amazon ect.