FTC Motor Wire Clip
prusaprinters
<p>Available in stl (inches or millimeters).</p> <p>A two-part 3D print that allows can be mounted to Actobotics® standard channel. The 6 wires slots are for (4x) 22AWG Encoder Wires and (2x) 16AWG Power Wires.</p> <p>All holes use 6-32 bolts. Those that mount the piece to the frame require a nut. The top piece that is fastened to the bottom does not require a nut. This is because the hole is smaller diameter at the bottom piece, allowing for you to thread it with a tap, or just use the bolt, and force it through the plastic.</p> <p><strong>NOTE:</strong> May cause damage to wires if you overtighten the top piece.</p> <h3>Print Settings</h3> <p><strong>Resolution:</strong></p> <p>1/128" or 200μm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>100%</p></div> <p><strong>Filament:</strong> Any ABS</p> </p> Category: Electronics
With this file you will be able to print FTC Motor Wire Clip with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FTC Motor Wire Clip.