FT Foam Build Battery mount holder

thingiverse

Hi, Take a look at my other designs https://www.thingiverse.com/BuiltBrokenGlued/designs This battery mount is specifically designed for the Flitetest Super Bee fuselage. **Without Doubler Fuselage:** The width used in this design is 54mm. The battery width required is 36.5mm. **With Doubler Fuselage:** The width used is 40mm. The battery width required remains at 36.5mm. To accommodate the doubler, you can adjust the shims to be thicker in your slicer by 1mm. If needed, I can modify the width of this design and upload it for you. This mount is secured to the fuselage using wooden dowels, but hot glue can also be used for added support, ensuring a secure fit. A Velcro strap surrounds the battery with a lip at one end, preventing it from sliding forward during landing. **Parts:** To use this template, insert a short, sharp dowel from the inside out to create holes that align the battery holder within the model. Only two holes are needed for proper alignment. The template itself is 5mm thick. The Battery Holder Variable features three holes, allowing you to adjust the placement of the battery box based on your chosen battery size. As you use a smaller battery, move the mount forward to redistribute the plane's weight accordingly. For added stability, I recommend using elastic bands at both ends of the dowels to prevent them from vibrating loose.