FT Dart/Twin Sparrow V2 Nacelle and Firewall

thingiverse

Here is an updated version of the new Flite Test Power Pack H Nacelle and Firewall. This design is based on the latest edition included with the FT Twin Sparrow. Print it, glue it, install it. I've also added a second firewall that can mount slightly larger EMax RS1306 motors, which are currently cheaper than the RS1106. These motors should fit, but I haven't confirmed it yet. You might need to drill out the center hole a bit. My printer made it slightly undersized, so I had to use a 3/16" drill bit to taper it and prevent the firewall from touching the motor's c-clip. If you've purchased a Power Pack H, make sure to download and print the 1106 Firewall.