FT-5 R4 Mod 06 - Printer Head Carriage Mount E3D Hemera + BLTouch

thingiverse

Updated Jan. 10, 2020\r\n\r\nUploaded new parts and deleted original components - these components were tested with a Hemera extruder on my FT-5 R2 printer (for fit.) Added version with lower mount for BL-Touch for the Volcano heat block (8.5mm lower BL-Touch mount).\r\n\r\nThis is a mount designed for the E3D Hemera Extruder on the FT-5 Printer that mounts the extruder under the X Axis Rail.\r\n\r\nBL-Touch mount moved to the left side, with the Hemera mount offset 9mm to the right for full bed coverage.\r\n\r\nTwo versions available for Hemera with V6 heat block, one for the Hemera with Volcano heat block. For the V6 heat block version, one has the mount for the BL-Touch flush with the "front" of the mount (side on print bed when printing mount), and a second with the BL-Touch mount pushed back 8mm (PushedBack in the file name).\r\n\r\nThe V6 Pushed Back BL-Touch mount and Volcano version leave room free around the manual feed on the Hemera extruder.\r\n\r\nEach of these mounts is available with a tab for mounting the cable chain to, or without the tab for mounting the cable chain (NoChain in file name).\r\n\r\nTwo holes at the top of Part A are designed to mount 4mm ID/6 mm OD tubing to feed filament to the extruder.\r\n\r\n.STEP versions of all files are included.\r\n\r\nSupport is only needed for the Cable Chain tab and for the BL-Touch mount if not pushed back 8mm.\r\n\r\nNozzle_To_Probe_Offset (-24, 23.25, ??) for V6 mount, flush to front\r\nNozzle_To_Probe_Offset (-24, 31.25, -2.80) for Pushed Back V6 BL-Touch or Volcano.