FT-5 R2 Mod 04 - Printer Head Carriage Mount E3D Titan Aero

thingiverse

Alternative Hot End Mount for the FolgerTech FT5 Printer. This is using an E3D Aero Titan with Super Volcano. While not tested, this mount should also work with the BMG extruder. There are two parts to the mount: Part A for the side with the extruder and Part B for attaching to the X-Axis belts. Four different versions of Part A exist: "E3D Mount Part A_BL_NoChain_r5" - No Cable Chain Support, mount for BL Touch Sensor "E3D Mount Part A_BL_r5" - Cable Chain Support, mount for BL Touch "E3D Mount Part A_noBL_NoChain_r5" - No Cable Chain Support, no mount for BL Touch Sensor "E3D Mount Part A_noBL_r5" - Cable Chain Support, no mount for BL Touch Sensor The versions with support for the cable chain have not been tested to ensure they will work properly with the cable chain supplied with the FT5 printer. The BL Touch mount version only works with the Super Volcano hot end. If not using the Super Volcano, use the "noBL" version of the mount instead. Use the original M3 hardware supplied with the FT5 printer to hold Part A and Part B together. The bolts are installed in the opposite direction - the nuts need to be inserted into Part A before mounting the Titan Aero extruder! M3 hardware is used to attach the BL Touch. Unfortunately, the length of the M3 machine screws is unknown. Some pictures appear compressed vertically on this platform. The reason for this remains unclear.