FSL Muse or Dremel DigiLab Laser 2.0" Lens Focus Billet

thingiverse

If you don't want or cannot print it yourself, we have a kit available to order visit http://maker.space/store/\r\nThis is a laser focus billet for use with the Full Spectrum Laser Muse or Dremel DigiLab Laser equipped with the 2.0" lens. This precise shape allows easy alignment under the focus head. The height of the end is 0.267", as verified by Michael in the Full Spectrum Muse Hobby Laser group on Facebook, and my printed billet matches it closely. If your printed billet is slightly high, simply sand it down or adjust it in the slicer until it's perfect. Thankfully, it doesn't need to be flawless - just very close, within 1/16" (0.0625"). A small empty hole is present at the bottom for a thin 3/4" magnet.\r\n\r\nI can create custom billets if you provide the height or simply scale this one up or down to suit your needs. Two STL files are available: blank and branded, use whichever you prefer.\r\n\r\nMaker.Space Focus Billet Features:\r\n- Primary focus area (square end) matching the original focus billet puck included with Muse\r\n- Second focus area in back for enhanced resolution during engraving\r\n- Third focus area located on the side, 1" tall, creates a very large kirf; use only for vector marking and test first to understand its effect on your substrate.\r\n- Longer with finger grip for easy sliding under the laser focus ring\r\n- Dimensions: 2.5" long by 1" wide allows it to be used as a spacer\r\n- Utilizes a thin 3/4" rare earth magnet, self-adhesive or secured with super glue.\r\n\r\nDownloadable Files:\r\n- Focus_Billet_Rare_Earth_Exposed_Magnet_v1.1.stl\r\n - Uses a 3/4" Rare Earth Magnet with a self-adhesive back or secure it with glue\r\n- Focus_Billet_Ceramic_Exposed_Magnet_v1.1.stl\r\n - Utilizes a more affordable Ceramic Magnet; rough up the inside and magnet to secure with super glue