FSAE seat mount

thingiverse

Mounting Bracket Assembly Installation Guidelines ==================================================== **Step 1: Preparation** Prior to installing the mounting bracket assembly, verify that you have all necessary tools and hardware listed below: * Drill press or hand drill * Drill bits (1/8 inch and 3/16 inch) * Socket wrench or ratchet * Torx screwdriver (#10) **Step 2: Locate the Seat Mount** Carefully locate the FSAE seat mount on the chassis of your vehicle. Ensure that the bracket is properly aligned with the mounting holes on the frame. **Step 3: Secure the Bracket Assembly** Insert the 1/8 inch drill bit into a power drill and pilot holes in each mounting hole on the FSAE seat mount. Insert a 10-32 bolt through each predrilled hole and secure the bracket assembly to the frame with the Torx screwdriver (#10). **Step 4: Verify Bracket Security** Double-check that the bracket assembly is securely fastened to the vehicle frame to prevent movement or failure under heavy loads. **Installation Complete** With all components properly installed, you should be ready to begin installing other essential systems. Proceed to install next component or feature as recommended by manufacturer or instructor.