FS T15 Bolt V4.2

FS T15 Bolt V4.2

grabcad

Tuning Bolt for FS T15Tested on T15 with Cocker Sleeve and Dynamic Sports Gear T15 Power Tube.The components uploaded here do not fit the standard bolt and bulkhead.Only the Striker and Striker components can be used from the standard system.Barrle Adapter:Bolt V4.2:May work with the standard barrle adpater. test required!!Bolt Mtip V4.2:TIP, Bolt AXE will not work with the standard barrle adpater.TIP, Bolt T15-Tip and Bolt V4.2 may work with the standard barrle adpater. test required!!There is an edge in the adapter, see picture.Material: BrassSurface treatment: hard chromium plated (must have)Aluminum is not allowed. The system is a mass locking system like a handgun. The bolt needs a corresponding weight for the correct dwell.Aluminum, titanium or similar are too light, the bolt opens too quickly, gas escapes into the magazine.Striker Spring:The 120% spring is not needed. The old 100% spring is sufficient and can be shortened if necessary.Oil to be used: Very thin oil, see T15-Oil.pdf.In the video T15-Oil is an example. Above paintball oil from DSG below penumatic oil from Festo Castrol Hyspin ZZ.FPS:More than +26FPS are possible with the Bolt V4.2.First Strike Round + Nemesis Barrle + Cocker Sleeve:The 10" Nemesis barrel is the perfect length for the Bolt. Longer or shorter barrels will bring FPS / efficiency losses.Fullauto Kit:The Bolt was not tested with the Fullauto Kit.

Download Model from grabcad

With this file you will be able to print FS T15 Bolt V4.2 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FS T15 Bolt V4.2.