Frsky X12S "Eye of Horus" Roller Button

prusaprinters

<p>I didn't care for the factory roller button on the Frsky X12S Transmitter so decided to have a little fun designing/printing a replacement.</p> <p>Now my Horus has a proper eye.</p> <h3>Print instructions</h3><h3>Category: R/C Vehicles Print Settings</h3> <p><strong>Printer:</strong> Original Prusa i3 MK2</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Notes:</strong></p> <p>I used Simplify3D to slice this and printed with full raft and custom supports to keep the bottom of the button clean. I ended up using two different processes, one for the button body and then one with a narrower extrusion width and higher infill overlap for the eye detail as Simplify3D would only print the outlines with no infill using my standard settings.</p> <p>I also adjusted the inner diameter of the hole and flat for the switch shaft to work best with my slicer and printer. It took a couple of iterations to get right and may need further adjustment depending on which slicer and/or printer you use. I included a step file along with the stl to hopefully make that easier.</p>