FRSKY Taranis Q X7, FPV LCD monitor folding mount V1

thingiverse

This is a folding mount for the FRSKY Taranis Q X7 or QX7 S. You can now mount an LCD monitor with a screw mount on the bottom of the monitor using this adapter. The included screw size is standard 1/4"-20, which fits most tripod mount LCD monitors. It also allows you to mount a large antenna, such as a Yagi or Helical. You will find nuts and bolts/mounting hardware, top piece, back piece, and a hinge with three different mounting holes for fitting various sized LCD monitors. Some assembly is required. Here's a folding mount I designed to fit an FPV monitor on a Taranis Q X7. This design is meant to be printed at 100% size in PLA. When designing, I already took into account shrinkage for PLA of about 1%. Just print with 40-50% infill and it should fit. If using ABS, you might add 2-3% size. DO NOT FORCE IT OVER THE LANYARD HOOK! It should fit loosely over that. Some minor Dremeling may be required on the lanyard hole. If you push too hard on the hook, it can damage the internal circuitry of the radio! Hardware includes: * (2) 20mm long bolts, which can be 3mm round to however large your hinge is by drilling out the hole larger. * (2) Lock nuts, M3 * (4) Washers, M3 * (1) 1/4"-20 bolt, about 1/2" long to mount the monitor * (3 or 4) 20mm long by 2 or 3mm wood screws for the back and lanyard hook bolt There are two hinges included with varying hole standoffs to accommodate multiple sized monitors. In the pictures above, that is the double. The holes are 16mm apart on center. The monitor is a Skyzone 702 or Foxtech d702, with the sunshade installed and using the double hinge, it doesn't touch the sticks when folded. I will print this for you! I have this for sale on eBay, same title as above. But it's a version 2 which is a bit more sturdy and refined and includes nuts and bolts. Print Settings: * Rafts: No * Supports: No * Resolution: .2mm * Infill: 40 or 50 * Filament: aio robotics PETG, Black How I Designed This: I used Inventor 2016 to design this folding mount for the FRSKY Taranis Q X7 or QX7 S.