FrSky R-XSR - REVERSE flex ! for Armattan Rooster

thingiverse

Hi! Here's an Frsky R-XSR mount for Armattan Rooster in reverse mode! I used Zip ties to get the arms spring back instead of getting tangled with the propeller. You'll need: - Flexible Filament (I used Sainsmart TPU) - 2x zip tie, 2.5 X 1mm - 2x Screw, M3 X 16mm - 2x plastic nut M3 - FrSky RXSR receiver - Good nerves, it's a little bit annoying work to get the zip ties through the holes! First, print it. I used 0.1 with 100% infill and it worked fine for me. Do supports to the bed, not more! The space between the cage from the receiver and the button plate is designed to print without support (you can separate it easily after the print), and we don't want any supports in the tubes! Insert the zip ties in the holes and cut them off. The zip ties are there to reduce flexibility at the arms, so they move down instead of moving upwards towards the propeller! Next, insert the antenna wires in the holes from behind the cage...insert the receiver also. If you want to move the receiver more downwards, cut a hole under the cage like in the picture! Put it in place at the rooster frame. Change the 2 screws and screw down the nuts. Good luck and have fun! Give me a like if you use it!