Front Panel Ikea Lack Table 3 Buttons (with Prusa Logo)

prusaprinters

<p>I wanted to have a nice front panel for my Ikea Lack Enclosure with some buttons to turn on the printer, some LED and the Raspberry Pi.</p> <p>I designed this really simple front panel with three holes (20mm) for the buttons and on the other side, added the Prusa logo to make it nicer :)</p> <p>The Switches that I used are from Mountain Switch (Model : R13-135). You can find them with or without the light and also in other colors. I find them on Mouser Electronics and they ship Worldwide.</p> <p>There is two STL, one for the buttons and the other with the logo. I put the two on the gcode and you can print them together on the same plate.</p> <p><strong>Modify</strong> it as you want and <strong>Rate</strong> it if you downloaded it :)</p> <p>Don't hesitate to leave a comment if you have a question and a Make if you made it.</p> <p><strong>Thanks for the support</strong></p> <p><strong>UPDATE 1 :</strong><br/> I added some supports on the back of the front panel due to the pressure on the buttons</p> <p><strong>UPDATE 2 :</strong><br/> I Installed mine with some strong double sided tape and there is enough contact surface to hold the pieces and nothing moves. Everything works fine.</p> <p><strong>UPDATE 3 :</strong><br/> I made a second version of the buttons side to fit some round M19 switches that you can find here : <a href="https://www.ebay.com/itm/1pc-Metal-Flat-Blue-Led-Push-Button-Waterproof-Resetable-Switch-19mm-QN19-C5-/223013789312">https://www.ebay.com/itm/1pc-Metal-Flat-Blue-Led-Push-Button-Waterproof-Resetable-Switch-19mm-QN19-C5-/223013789312</a></p> <h3>Print instructions</h3><p>Print in 0.15 or 0.2 with the front face down to have a nice first layer.</p> <p>Use supports from the build plate for supporting the bezels and the holes.</p> <p><em>Be patient during approximately 14 hours and don't forget to eat gummy bears and to drink water :)</em></p>