Front landing gear support for HobbyZone Apprentice S 2 1.2m

prusaprinters

<p>This is a replacement for the stock front landing gear support for HobbyZone Apprentice S 2 1.2m, but is not an exact copy of the original. This one should be a bit stronger than the stock one, fits well, and is a quick print. If you ever have a very hard landing, or hit anything with the front landing gear, this part is probably going to break. The original part isn't very strong, and is the only thing keeping that nose wheel securely in place.</p><p>The worst thing about the original replacement part if you buy it from a hobby store, is you can't buy this part alone, you must also buy the front landing gear wheel and arm, which probably isn't ever going to break. You are very likely to need just this one part, and possibly also the motor mount, neither of which you can buy without buying other unnecessary items that are very unlikely to ever break.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer:&nbsp;</strong></p><p>Prusa Mini+</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>.15</p><p><strong>Infill:&nbsp;</strong></p><p>50-75</p><p><strong>Filament:</strong> any PETG, PLA any</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Supports needed for the screw holes, but should be easy to poke out with a small screwdriver. Resolution/layer height shouldn't really matter. Use a high amount of infill to take the abuse of hard landings.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: R/C Vehicles</p>