Front Access Spool Holder for AFINIA/UP!PLUS

thingiverse

Human: A detachable rod is featured in this spool holder, which provides front side accessibility so you can change spools even if the housing is on AFINIA. The filament guide needs to be installed separately. Compatible Spools: Inner diameter starts at 30mm Thickness maxes out at 100mm A separate holder won't include a filament guide. Check here for compatible filaments http://www.thingiverse.com/search?q=filament+guide+afinia&sa= Printer: AFINIA H480 Filament: ABS Settings: Default settings were used (0.2mm layer thickness) Uploaded: V2 rod in 2015-06-26 Revised and Renamed to "Front Access Spool Holder": 10/23/15 Japanese: Separable for AFINIA use, the spool holder has a front side access so you can exchange spools even when AFINIA is under its housing. Supported spools: Inner diameter should be above 30mm Thickness needs to be less than 100mm Note that the provided file includes only the holder section, and that the filament guide will need separate installation.http://www.thingiverse.com/search?q=filament+guide+afinia&sa= My own AFINIA enclosure measures at 45x90 cm made of three boards of pressed wood which I cut into halves and secured with glue.