Friendly Articulated Slug (ezbrim)

prusaprinters

<p>This Friendly Articulated Slug is a remix of <a href="https://www.thingiverse.com/thing:4727448">thing:4727448</a> by <a href="https://www.thingiverse.com/_Isaiah_">Isaiah</a> that allows <strong>easy</strong> printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing.</p><p>I created this after failing to print the default model after 4 tries due to layer adhesion of the tiny bottom parts. I use a heated build plate, but never use additional adhesive. I tested this by printing at 100% scale with 0.4 and 0.25 nozzles with default PLA config on <a href="https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&amp;linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=28c787aef7c5a20cf2004b821dd161bf&amp;language=en_US&amp;ref_=as_li_ss_tl">Prusa</a> MK3S+ successfully.</p><p>If you are using a typical 0.4 mm nozzle you may want to try turning down 'Extrusion Multiplier' in PrusaSlicer Filament settings to 0.90 (90% flow in Cura). Most people are over extruding which won't affect 99% of prints but ones like this slug which require perfect tuning need to extrude less filament to work correctly.</p><p>If you have a 0.25 mm nozzle you should use that and it will work without issues.</p>