FRIEND - Personalised USB case

thingiverse

This is a custom-made USB flash drive enclosure, designed by visiting http://customflashdrive.co.uk/3d-print-your-own. I have downloaded the STL file from this site. Print Settings Printer Brand: Leapfrog Printer: Creatr Supports: No Resolution: 0.2 mm Infill: min. 15% Notes: PLA Settings: Wall Thickness: 0.8 mm - The Extrusion Width of the printer's nozzle is 0.4 mm, so one shell is not enough to provide sufficient strength. Two shells and a total wall thickness of 0.8 mm result in a strong and durable USB case. Infill: 15% - A minimum of 15% infill is recommended for stability. If you don't use this setting, the outcome might easily break. You can increase the percentage of infill, but do not decrease it for the sake of strength and durability. This is a honeycomb-shaped infill. One print will take about 30 minutes if you use this setting. Printing Speed: 150 mm/sec - Printing speed affects quality. This speed may seem too fast, but it has been tested before. Post-Printing Suitable USB Memory Stick To find suitable USB memory sticks that fit perfectly in the hole, visit Amazon. We only recommend this product because it works. It's a USB 2.0 with various colors and capacities. https://www.amazon.com/V7-Mini-Flash-Drive-VU24GCR-YLW-2N/dp/B00AZG90E6/ Stabilizing the USB Stick Use a glue gun to stabilize the memory stick after printing. Suitable USB Memory Stick How I Designed This Where can you personalize your own USB cases? This design was created at http://customflashdrive.co.uk/3d-print-your-own/. You can also visit this site to personalize your own 3D printed USB case and download an STL model. Collection of Personalised USB Cases