FRIEND - Personalised USB case

pinshape

Summary This is a custom-made USB flash drive case, designed by me at http://customflashdrive.co.uk/3d-print-your-own. I've downloaded the STL file from this website. Print Settings Printer Brand: Leapfrog Printer: Creatr Supports: None Resolution: 0.2 mm Infill: Minimum 15% Notes: PLA Settings: Wall Thickness: 0.8 mm - With a nozzle width of 0.4 mm, one shell is not enough to provide sufficient strength. Two shells with a total wall thickness of 0.8 mm deliver a strong and durable print result. Infill: 15% - For stability, use at least 15% infill; otherwise, the outcome may break easily. A honeycomb-shaped infill setting can be used for satisfactory results. One print takes about 30 minutes with this setting. Printing Speed: 150 mm/sec - Printing speed affects quality; despite its speed, it's been tested and validated. Post-Printing Suitable USB Memory Sticks To find a suitable USB memory stick that fits perfectly, visit Amazon at https://www.amazon.com/V7-Mini-Flash-Drive-VU24GCR-YLW-2N/dp/B00AZG90E6/. Stabilizing the USB Stick Use a glue gun to stabilize the memory stick after printing. How I Designed This Where can you personalize your own custom-made USB cases? This design was created at http://customflashdrive.co.uk/3d-print-your-own/, where you can also download an STL model. Here, you can create and customize your own 3D printed USB case collection.