Free Standing Filament Spool Holder

thingiverse

Introducing a freestanding spool holder, specifically designed for 3DFilaPrint's 1KG PLA spools (1.75mm, 68mm width with a 52mm center hole). This holder allows you to adjust the tension by tightening a screw/bolt (M6 recommended, but customizable). To assemble, print necessary parts such as 'foot', 'a-frame', 'bearing', and 'spindle nut'. Find a suitable 75-80mm long screw/bolt for the spindle. Print the corresponding 'spindle hex' or 'spindle round bolt' part depending on your choice, along with an optional 'hex filler'. Assemble by placing an M6 nut in the 'spindle nut', followed by the 'hex filler', then insert the screw/bolt through the spindle part. Attach bearings to the a-frame parts and push these into the feet. Finally, place bearings on the spool and tighten as needed before dropping onto the a-frame. Note that parts are designed for a snug fit and some adjustments may be required.