Free Standing Desk Shelf

thingiverse

01/03/2021 Update: Added file for a connector to connect multiple shelves together. You can print two variations of this or both. One version has a top you can just use as a shelf and the other a 50mm high box for storing tools and supplies etc. The bottom remains open for storing loose or bigger items. I used supports on the Top Panel.stl to support the inset where the panel and box slot in. They weren't super fun to remove but it worked. feel free to experiment with orientation for best print to suit you. I printed all the files in the orientation they are saved in. Depending on you bed size you can fit the 2 side panels on the bed to print at once. The tabs on the side panels and the holes on the back panel may need slight filing/drilling to achieve a good fit. Everything else I had to print one at a time. The box took 15 and a half hours to print at 50mm/s. I have glued everything with CA/super glue and it's quite sturdy. Feel free to change or remix as you see fit. Initial layer at 60c and then 55c bed temp for the remainder of the print. 200c Nozzle temp. Make sure you have a good bed level. I used the anti-warping plugin in cura and place an anti-warping circle/brim at each corner. Everything printed 100% with no warping from the bed at all.