Free 3D printable RC Shark 1/8 scale (Shark.Aero)

thingiverse

<h4>Downloads also (including older and next/development versions):</h4> We publish the latest bundles exclusively on Thingiverse.com. If you encounter any issues with a part, <b>check our website for new releases in the "New versions" category.</b> These updates will be included in upcoming bundles. To stay informed about new files, subscribe to our news section on our website. https://www.shark.aero/downloads <h4>YouTube Channel:</h4> https://www.youtube.com/channel/UC_mdViBBp7xAXUPLbK0KcDg <h4>Basic specifications:</h4> Wingspan: 990 mm Length: 856 mm Wing area: 12.9 dm2 Airfoil: Clark Y modified Take-off weight: 940 g Printed weight: 540 g Center of Gravity: beside the main landing gear leg Flight time: 10 minutes <h4>Description:</h4> The airplane is designed for experienced RC pilots as a transition model from EPP models to 3D printed. Thanks to its chosen airfoil, it flies slower and more gently compared to equally large 3D printed models currently available. With the recommended configuration we tested 10 minutes flight time and it flies more briskly in the version without the landing gear. G-codes were generated using Cura 3.1.0 slicer and tested for Original Prusa MK2S printer, but we also achieved comparable results with cheap Chinese printers Infitary M508 and Anet A8. Recommended material is PLA, landing gear parts could be ABS, HIPS, PETG or other materials. <h4>Recommended equipment:</h4> • Brushless motor: Turnigy 3530/14 1100KV https://hobbyking.com/en_us/turnigy-d3530-14-1100kv-brushless-outrunner-motor.html • Controller: 30A (must be thin, due to small space under the battery) https://hobbyking.com/en_us/aerostar-30a-electronic-speed-controller-with-2a-bec-2-4s.html https://hobbyking.com/en_us/turnigy-ae-30a-brushless-esc.html • Battery: Turnigy 2200mAh 3S 25C Lipo Pack https://hobbyking.com/en_us/turnigy-2200mah-3s-25c-lipo-pack.html • Servos: standard 9g (4 x) https://hobbyking.com/en_us/turnigytm-tg9e-eco-micro-servo-1-5kg-0-10sec-9g.html • Front wheel: 40 mm diam. https://hobbyking.com/en_us/40mm-wheels-5pcs-bag.html • Main wheel: 45 mm diam. https://hobbyking.com/en_us/45mm-wheels-5pcs-bag.html • Propeller: 9x6 CCW https://hobbyking.com/en_us/apc-style-propeller-9x6-bone-ccw-1pc.html https://hobbyking.com/en_us/apc-style-propeller-9x6-grey-ccw-2pcs.html • Piano wire 0.8 mm https://hobbyking.com/en_us/36-music-wire-032.html • CA hinge sheet: https://hobbyking.com/en_us/ca-hinge-sheet-180mm-x-180mm-10sheets.html • 2 mm wire for wheel axes (alu, steel) (we tested a small piece of PLA filament - it broke during the first landing, maybe will be usable stronger material) • Cross recessed countersunk head screw 2.5x12 (5 pcs) http://www.fabory.com/en/fasteners/screws/cross-recessed-countersunk-head-screw-for-chipboard-pozidriv-steel-zinc-plated-2-5x12mm/p/29240025012 • Servo lead extention 15 cm (2 pcs) https://hobbyking.com/en_us/15cm-servo-lead-extention-futaba-26awg-10pcs-set.html • Straight wire 2F to 1M Y lead https://hobbyking.com/en_us/6cm-futaba-26awg-straight-wire-2f-to-1m-y-lead-5pcs.html • Linkage stoppers for 0.8-1 mm pushrods (optional) https://hobbyking.com/en_us/brass-linkage-stopper-for-1mm-pushrods-10pcs.html