Frameless hanger for art cards and prints

prusaprinters

<p>Inspired by anoved's Frameless Hanger for 3/16" Foam Core (<a href="https://www.thingiverse.com/thing:963747">https://www.thingiverse.com/thing:963747</a>), this is a miniature version for 1mm or less thick art cards and art prints. Print 4 corners, tie them together with string, and use to hang the cards.</p><p>I've included the OpenSCAD file used to create these, but note it is not parametric - any changes you make will likely require further tweaks to make everything work out.</p><p>Important: Do not put pressure on the loops when tying the string, they are liable to break off, and the cardstock will deform under tension anyway.</p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>SeeMeCNC</p><p><strong>Printer: </strong>Rostock MAX v2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>0.3</p><p><strong>Infill: </strong>100%</p><p> </p><p><strong>Notes:</strong></p><p>Print these vertically without support. I used a skirt to help hold the objects to the bed and that worked fine. A full brim that includes the interior area requires too much post-processing clean-up.</p><p> </p><p>Category: Art Tools</p>