Frame Motor for Kossel / Deltaprinter 20x20

thingiverse

This is a fresh remix of the Kossel "frame_motor_2020sw". I designed it from scratch using Fusion360. Unfortunately, I couldn't find the source code because there are countless variations on Thingiverse. Here's what I changed: * I adjusted the motor distance to fit a vibration damper I found online at https://de.aliexpress.com/item/Hot-sale-5-pcs-lot-Nema-17-stepper-motor-Vibration-Damper-shock-absorber-for-42-step/32764435765.html. * I enlarged the cutout for T-nuts. * I drilled holes through the entire part to secure the motor screws. * I made a small notch on the underside for cables (endstops). * I reduced the radius next to the screws, which holds the motor, to accommodate washers. * I condensed four long sections parallel to the extrusion into three. Version 1: Tested. It was challenging to insert the extrusion, and there's limited space for cables on the underside. Version 2: Tested. I enlarged the cutout on the underside (radius 5mm instead of 2.5mm), reduced the radius in the corners where the extrusion passes through (0.5mm instead of 1mm). Version 3: Tested. A minor update. I rounded the corner/area where the cable bends from the underside to the extrusion. This resolved a problem moving the cable when the extrusion was in place. I also tweaked the logo slightly. I'm eager for your feedback!