FR7 v5.x Frame Cut Files

thingiverse

***NOT FOR COMMERCIAL USE*** FR8 v6 - Hero9 Bi Blade Raw, No Hypersmooth https://www.youtube.com/watch?v=yuTGKzRcTTG Frame and prints soon to be available at AirbladeUAV! Link to v6 (6.1 not yet available through Airblade) https://www.airbladeuav.com/products/fr8-7-inch-long-range-frame-kit?_pos=2&_sid=d22726d74&_ss=r FR8 v6.x Frame Files - Only the latest and greatest cut files will be posted. Old files will be removed. - v6.1: Updated front plate 20x20 pattern to accommodate the DJI Vista Canopy - Changes: - v6 is roughly 75 grams lighter (carbon) than the v5 frame. - Arms narrowed down, arm ends reshaped, lightening cutouts added at plate interface. - Added center clamping fastener for arms. - Rear plate has incorporated the lessons learned from the FRH design. - Front and Top Plate lengths have been increased by 12mm in order to accommodate the Hero 9 Superview FOV, eliminating props from view. Plates are still compatible with v5 prints. - Added a second set of rear standoffs. - Updated rear plate geometry (created flats) to accommodate a battery strap running under the stack. - Rear lower battery strap slot moved fwd in order to eliminate routing issues when using the rear stack. - Recommended Top Plate thickness updated from 2.5mm to 1.8mm with the addition of the second set of rear standoffs. - Backwards compatible with v5 arms. - Backwards compatible with all v5 prints with the exception of the arm ends and skids, unless using the OG v6 arms. - It should be noted that the addition of the second set of rear standoffs and the increase in length of the front plate may or may not be compatible with the DJI Air Unit Camera cable length. It may necessitate the removal of the newly added rear standoffs and/or extend the cable length. 7" Arms No Props In View, No Cropping Required Recommended Plate Thicknesses: - Front Plate: 2.5mm - Rear Plate: 1.8mm - Top Plate: 1.8mm - Front Arm: 6mm - Rear Arm: 6mm Hardware BOM: Description; Qty; Notes 3mm Standoff, Round (5mm OD), 10mm; 2; Front 3mm Standoff, Round (5mm OD), 20mm; 4; Rear 3mm Standoff, Round (5mm OD), 28mm; 2; Cam Uprights 3mm Standoff, Round (5mm OD), 30mm; 2; HD Camera Holder Button Head Screw, M3 x 5; 2; Front Standoffs Button Head Screw, M3 x 8; 18; Standoffs and Cam Holder Button Head Screw, M3 x 12; 9; Arms (may opt to use a single washer at the center clamp fastener in order to ensure stack clearance.) 3mm Press Nuts; 9; https://www.mcmaster.com/94100a110 or equivalent 3D Print files: https://www.thingiverse.com/thing:3601947