FPV Cycle Glide - HDZero Race VTX 30mm Stack Mount

prusaprinters

<p>Came up with this design to fit the HDZero Race VTX into a 30mm stack mount on the FPV Cycle Glide frame. Offset it so that it will sit inside the standoffs, just enough clearance to get squeeze it in and clear everything. I run mine on top of 30mm 4in1 ESC with FC mounted at the front behind the FPV Camera.</p><p>Designed to be printed in 95A TPU and the VTX just clips onto the mounting lugs and there is a hole underneath to keep the weight down and allow cooling air into the bottom of the VTX. Tested in +40C ambient air temps during Australian summer so cooling is effective enough.</p><p>Print in TPU 1.2-1.6 layer height for best results, quick easy print if you have TPU settings dialed in.</p>