FPV Camera mount fatbee FB90 / CM275T on e010 0.4g (customizable)

thingiverse

Human: Inspired by the customizable mount generator on Thingiverse, I faced an issue with smaller camera sizes. To utilize the lightest option on e010 or H36 drones, every tenth of a gram adds to endurance and lift. Hence, only two screws are necessary. This mount can be printed at 0.4g. I optimized the Fatbee FB90 AIO spare camera from Banggood for quick results. The e010 with its original frame, two-blade props chopped from origin, MyLipo 235mAh 4.35V HV battery, camera mount, and FB90 camera totals 25.8g. This weight could be reduced by using a lighter frame and removing the heat tube from the antenna to reach 24g. Update: The CM275T camera is identical to the FB90 cam except for its 600TVL sensor. Both cameras have 480NTSC/540PAL lines only. The STL file allows for 15° or 10° camera angles, and other angles can be achieved by modifying the SCAD file. To level the camera, a small plastic part should be placed below the mount on the left side due to the big capacitor on the right side of the origin board. Print Settings: Printer: Mendel90 Rafts: Doesn't Matter Supports: No Resolution: 0.1mm Infill: 20% Notes: 0.4mm nozzle, 0.8mm shell, 0.6mm top/bottom, ABS