Foxeer Box 2 Mount for Wizard x220

thingiverse

Here are some updates to my previous print settings: I've switched to Esun Eflex, which is probably better than the original material. My new print height is 0.2mm with a brim. On July 4th, I added a FoxeerBox2Mount.stl file that allows for a 25-degree angle attachment using the four front screws of the frame. After printing, be sure to cut the thin integrated support at the front. On July 7th, I updated my print settings again by adding a new FoxeerBox2Mount_Noscrews20deg.stl file with a 20-degree angle designed for Velcro strap attachment. Remember to cut the thin integrated support at the front after printing. My current print settings include using TPU material with a layer height of 0.6mm and a brim. I'm also using a volcano e3d hotend with an 0.8mm nozzle. On July 15th, I added another update by including a FoxeerBox2Mount_Noscrews20degA.stl file that has a 20-degree angle attachment designed for zip-tie usage. As before, be sure to cut the thin integrated support at the front after printing. My print settings remain the same: TPU material with a layer height of 0.6mm and a brim. I'm still using a volcano e3d hotend with an 0.8mm nozzle.