Fox 40 Volume Spacer 5cc
prusaprinters
<p>Half size volume spacer for the fox 40 fork. Made this almost two years ago. Proven in the world cup on board the bikes of numerous riders. Give it a try if you really like to dial in your bike setup</p><p>PRINT SETTINGS</p><p>The smaller your layers, the better, print hot and 100% infill to eliminate any empty space in the part. this is going to take high amounts of pressure.</p><p>Any plastic should work fine. i tested PLA and PETG mostly. no deterioration in suspension oil when left completely saturated for almost a year.</p><p> </p><p>for best results, use soluble supports if possible. I used breakaway supports, make the support shape concentric so you can pull the supports out in one yank. </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>
With this file you will be able to print Fox 40 Volume Spacer 5cc with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Fox 40 Volume Spacer 5cc.