Ford FlatHead V8 (4/14) / Crank Pulley remix

thingiverse

This is a revised Crank Pulley design for the Ford FlatHead V8 engine, available on Thingiverse (https://www.thingiverse.com/thing:2537602). The plan includes integrating a supercharger in the future. The files are divided into two sets: 1. A fileset named V1 for engines built before April 2020. - CrankPulley.stl - CrankPulleySpacer.stl 2. A fileset named V2 for engines produced after April 2020. - CrankPulleyV2.stl - CrankPulleySpacerV2.stl **Print Settings** The settings are identical for both filesets: 1. One unit of Crank Pulley: Layer thickness = 0.15mm, Raft = no, Brim = no, Support = no, Infill density = 20% 2. One unit of Crank Pulley Spacer: Layer thickness = 0.15mm, Raft = no, Brim = no, Support = no, Infill density = 100% **Accessories** **Fileset V1:** 1 x 10mm long rod with a diameter of 2mm 1 x M3x50mm SHCS screw 1 x M3 washer **Fileset V2:** 2 x M3x50mm SHCS screws 2 x M3 washers **Mounting Instructions** For mounting instructions, refer to the images accompanying Fileset V1.