Folgertech FT-6 SOLID Bowden (+dual) extruder mount REMIX
thingiverse
This is an updated version of the hot side for Blinkingsun's fantastic design. If you're working with the FT-6 and have the dual bowden hot end, be aware that the mounting holes are spaced 24mm apart, not 18mm as previously stated. That's all I changed here - simply pushed the mounting holes out by 3mm on each side for the two hot end mounts. You'll need to visit Blinkingsun's original page and print the other parts from there. According to Blinkingsun's instructions: "Print this part with a layer height of 0.2mm, including the bottom layer, using 8 top and bottom layers, and 4-layer thick walls at a 25% infill." Update: The bed level sensor mount has been modified to accommodate an 9.3mm spread. This should allow you to install either the factory ABL sensor or any adapter designed for mounting a BLtouch like this one by paxtonwolfgang (available on Thingiverse as thing:3339356).
With this file you will be able to print Folgertech FT-6 SOLID Bowden (+dual) extruder mount REMIX with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Folgertech FT-6 SOLID Bowden (+dual) extruder mount REMIX.