Folding PDW Stock/Brace, Model 1

prusaprinters

<p>A short length of pull, folding stock/brace. Mounts via 4+ slot picatinny rail. Either a blade style brace, or buttstock can be fitted in the rear socket of the folding arm.&nbsp;<br><br><br><strong>Print instructions</strong><br><br>Print Settings:</p><p>Extruder: 216C&nbsp;<br>Bed: 56C&nbsp;<br>First Layer Print Height: .18mm&nbsp;<br>Standard Layer Height: .16mm<br>Wall Thickness: .40&nbsp;<br>Wall Perimeters: 5<br>Infill: 50%<br>Infill Pattern: Gyroid<br>Material Flow: 100%<br>Support Material Percentage: 20%</p><p><br>Hardware Needed:</p><p>1x M6x40mm Bolt<br>1x 8mm x 20mm Spring (Ender 3 Bed Spring)</p><p><br>Notes:</p><p>1) The M6x40mm bolt should simply pass through the hinge of the folding arm. Should the threads cut into the hinge, dremel out the hole slightly until the bolt passes through. The bolt should only thread into the folding mech mount's top and bottom hinge points. Be sure not to overtighten the bolt, otherwise the hinge points could flex and squeeze together, binding the folding arm and not allowing it to articulate.</p><p>2) If the spring is too tight, simply cut off a coil to reduce pressure on the mechanism.</p><p><br>&nbsp;</p>