Foldable phone mount + joystick cover for DJI controller

prusaprinters

<p>Inspired from <a href="https://www.thingiverse.com/thing:3019885">https://www.thingiverse.com/thing:3019885</a></p><p>Update: 20 Aug 2022, updated to combine the fixed and base into a single file(more stability) and adjusted offsets for smoother movement</p><p>Designed a two-in-one utility print for the DJI remote controller. Should work on DJI Spark / Mavic Pro / Mavic Air / Mini SE. It acts as a joystick protector/cover(and fits in the case) and when expanded can be used to hold your mobile(especially if your phone has a thick case like mine)</p><p>Three piece body</p><ul><li>Base + Cover: Goes easily on top of the joystick when used as a cover and fits inside the phone arms of the remote controller when used as a mount. PLA is fine</li><li>Fixed Arm: This fits on the base using a small notch. It should move once fixed. Feel free to glue it if you feel but I found it to fit perfectly. The flap has a print-in-place hinge that folds when not in use. &nbsp;Recommended to print in PETG for strength</li><li>Moving Arm: This slides inside the fixed arm and also has the print-in-place hinge.&nbsp;</li></ul><p>Use a rubber band to align with the notches created around the top assembly.&nbsp;</p>