Foldable Knife

prusaprinters

Parts:  Blade1Bladeholder (Part that holds the blade in position)1Handles2Bolts (Lenght=19mm)2Bolts (Lenght=12mm)2Build up:First take the blade, both bolts (Lenght=12mm) and both handles. Then put the blade inside the handle and put the bolt through the holes in the inner part of the handle, so that the handle is connected to the blade. Do that on both sides. Take the bladeholder, both bolts (Lenght=19mm) and the parts from the first step. Then connect the handles to the bladeholder by putting the bolts into the holes. If the bolts are slipping out of the holes, you can glue them in.  DONE!!!!Sidenotes:Here are a few pictures for you so you can imagine what size the knife is. If you want the knife to be smaller or bigger, you can scale it up or down in the slicer.The handle consists of two different parts which are connected by a bolt. The bolt is connected to the inner part of the handle as you can see in the images. Thats why the handle can be printed in place. After the print is done you have to remove the supports. Here is a good way how to put all the parts on the printbed and also where to put the supports: Thanks for downloading the knife!!!