Fold Away LED Mount

thingiverse

I designed this to provide light to the work area in front of my 12" x 24" flow hood built from 1/2" MDF. Pictures are of an earlier design. The handles on the sides are not my design. LED solid mount/ larger: (Larger incase your printer is a little out of calibration) This one fully surrounds the light for a more permanent fixture. I included 2mm test rings to see which arm works better for you. I printed this with 6 perimeters, 10% honeycomb infill, and 0 top/bottom layers. You could use top and bottom layers and less perimeters. Removeable LED mount: My original design featured a removeable LED incase you also use it as intended as an under counter light. I printed the removeable LED arms 8 perimeters and 0 top/bottom layers with 10% honeycomb infill to get the design. You could use top and bottom layers and fewer perimeters. Hinge: it is directional, it should slope down and away from you. The Hinge was printed with 8 perimeters and 20% infill. You could probably get away with less infill and fewer perimeters. Non-printed parts: 2 - M5 x 30mm hex head screws 2 - M5 nylock nuts 4 - 1/2" wood screws This is the light I used. https://www.homedepot.com/p/Commercial-Electric-18-in-LED-Under-Cabinet-Light-Bar-Plug-in-Linkable-500-Lumens-Adjustable-Color-Options-2700K-3000K-4000K-54195201/306297932