Focal Tripod - Pixel 6a Mount

prusaprinters

<p>A Pixel 6a mount that fits a Focal tripod shoe. The phone clip is designed to hold a Pixel 6a wearing a Google case.</p><p>The two-part design allows printing with no supports.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer:&nbsp;</strong></p><p>I3 MK3S</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.2mm - 0.1mm</p><p><strong>Infill:&nbsp;</strong></p><p>15%</p><p><strong>Filament:</strong> Any brand and color PETG</p><p>&nbsp;</p><p><strong>Notes:</strong></p><p>I used a small trick to print the clip's overhangs with no support -- starting at 13.6mm I switched from 0.2mm layers to 0.1mm layers. This creates smaller overhangs, and allows each layer to cool off a little more before the next layer is applied.</p><p>The clip's tab snaps into the base. But because the locking tabs are small, you can pull it apart with a little effort. I put a few drops (DROPS) of Gorilla Glue into the bottom of the slot before snapping in the clip to create a more permanent assembly.</p><p>I printed in PETG for flexibility. The print uses 15% infill, and it works great; but, I also used four perimeters to effectively create a solid clip. The honeycomb design saves material, increases flexibility, and is esthetically pleasing.</p><p>&nbsp;</p><p>Category: Mobile Phone</p>