FM Receiver Module Faceplate
thingiverse
This is a face plate for a widely available FM radio receiver module. I made this to bolt to the front of a larger device; but I have included a small box to house it temporarily. If you are here, you probably already have one but just in case, the module is available from numerous sellers on eBay and other usual sources. I bought mine on eBay but for reference here is a link to Aliexpress https://www.aliexpress.com/item/Hot-Digital-Stereo-FM-Radio-Receiver-Module-and-FM-Modulation-Phase-Locked-Loop-PLL-to-Make/32697249502.html. The CAD files are available at Onshape https://cad.onshape.com/documents/94fe97cea9bdaa4bcc6065cd/w/a4b268e8192fbc53de5a2d44/e/b936743748aed460fb954276 for you to customize. The module is held in place with 3mmx8 screws. The back is designed to use 3mm thread brass inserts. The back has a hole for a 4mm or 8-32 screw to attach an antenna. However, you may find that you don't even need to add an antenna. There are large access holes on the sides for the USB cable and audio jack. Note that the cables thread through the sides to plug into the board on the inside. Not all cables will fit. This little guy works really well!
With this file you will be able to print FM Receiver Module Faceplate with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on FM Receiver Module Faceplate.