Flysky Noble NB4 Legs

thingiverse

I found that mounting my 7" FPV screen to my Noble NB4 (with the bracket available here on Thingiverse https://www.thingiverse.com/thing:4278428) it became too front heavy to set upright on its base. Building upon the existing work from Magnetik (base sleeve) I made a sleeve assembly that has fold out legs. The following updates were made to the original base sleeve design that was remixed: 1. Add pivot tabs and clips for LH and RH legs 2. Increase top thickness to support pivot tab geometry 3. Generate LH & RH pivot brackets 4. Add necessary screws and knobs for assembly The legs/feet are made of 2 6mm x 140mm hex head bolts and 2 6mm knobs. I suggest buying 150mm bolts and cutting them down so there are no exposed threads. Due to the triangular shape of the knobs I also suggest gluing the knobs on the threads in the proper orientation. The pivots are 2 6mm x 30mm hex head bolts and the same knobs used for the legs/feet. Below are the knobs and bolts I am using and currently shown in the model. 6mm Knob (Need 4) https://www.mcmaster.com/2776K62 6mm x 150mm hex head bolts (Need 2 and need to cut down approx 10mm) https://www.mcmaster.com/91287A268/ 6mm x 30mm hex head bolts (Need 2) https://www.mcmaster.com/91287A903/ Note: You only need to print the body and the pivot brackets. All other files are for reference. Initial Design on August 8th, 2020 - Still need to do final assembly & fit check.