Flsun sr Ultralight Effector Deported fans rapido hotend lgx lite adxl345

thingiverse

Here's the full setup to get an ultralight effector with deported cooling fans This is for a rapido hotend, lgx lite and adxl345 the hotend is at tight fit. You need a 3010 24v fan https://fr.aliexpress.com/item/1005002253768792.html A 12/15mm light and flexible tubing you can find on this kind of pump https://fr.aliexpress.com/item/4001084733112.html 1 - Print the Effector (4walls, 4 top and bottom layers, 40% to 60% infill) 2 - inset the original ball pins and screw in the small screws to secure 3 - install the rapido and secure it with the 4 screws 4- get the cables through the plate 5 -install the fan 6 - install the fanducts 7- Install the stock leveling sensor support 8- install the 5015 supports ion the back arm rods and hotglue the fans in it 9- Cut two lenghts of tubes and connect it in the effector plate and in the fan supports (the lenght must be sufficient to avois stress on the tube when the print head moves. use hotglue to attach the tubes this is a remix of https://www.thingiverse.com/thing:5379916