FLSUN SR Nova (1.2) + LGX Lite

thingiverse

This mount is made for the nova v1.2 which has a smaller fan mount and cool cutout for the wires so you can easily route them. Unfortunately, only those of you using the mount for Bowden will experience this joy. it broke my heart having to cover it up for the lgx lite, I did contemplate flipping the hotend around so that I could use this feature but... anyway there are two main mounts one has bigger holes in it for the "feature" listed above the other is less hole-e but, just as functional in fact if you only have a nova now but want to get an lgx later you can easily mount it later without reprinting everything. also if you have the v1.1 nova you can buy just the upgraded heatsink (currently on sale) I may make a mount later for the v1.1. on the back of the mount I have a 4mm hole that I used for putting the old PTFE tube in to use as a spine it will help the wires stay nice and straight whilst printing. I have also included in the step and f3z file a fan duct template I spent quite a long time trying different fan duct designs before landing on the one I have included but there isn't a lot of space so its extra tricky. if by chance you dive into the step and or the f3z file and are browsing my sketches and thinking wtfff don't worry, I to wondered such things, fyi I have no idea what I'm doing... The effector I got from somewhere on here and have modified it to be correct, I plan on making my own effector but for now this should do. Edit: the more I thought about it the more it bothered me so I made a reverse mount for the LGX nova its tight so I'm sure assembling it will be fun. for your sanity put the screws that will hold the LGX in first (button head not alot of space from the nova fan) then install nova hotend, screw down LGX and PTFE tube between nova and LGX install it to effector then install the fan mounts, they are a light press fit so don't tighten down the effector until fan mounts are on correctly. you'll have to dremel some material away to use the reverse mount, you have to remove a small amount for the others aswell cause the hot end heater is oblong but a small file will do the job.